Solved: iertutil.dll was not found error

After so many years, Microsoft started to phase out IE6 and started rolling out Internet Explorer 8 update. But many people experienced a problem after the compulsory IE8 windows update. Their Windows computers won't boot, instead it shows this error:
bcmwltry.exe/explorer.exe - Unable to Locate Component
This application has failed to start because iertutil.dll was not found. Re-installing the application may fix this problem.
 The ordinal 681 could not be located in the dynamic link library iertutil.dll
This error is caused by an improper installation of Internet Explorer. You can try this solution to fix this problem:
1. Press CTRL+ALT+DEL when you see the error.
2. With the Task Manager running, click File then New Task, type CMD then press enter.
3. A black window will open, this is the command prompt. Type these commands (press enter after each command):
ren c:\windows\system32\dllcache\iertutil.dll iertutil.old
copy c:\windows\system32\dllcache\iertutil.dll c:\windows\system32
Basically, you're copying a copy of iertutil.dll from the dll cache folder to system32 folder where it should have been. Close everything and Windows will load up fine.

You can also try this one if you're not comfortable in using Command Prompt.
1. Press CTRL, ALT and DEL
2. From Task Manager, click File, New Task, then Browse.
3. Change the file type from Programs to "All Files".
4. Now navigate to c:\windows\system32\dllcache\ and find iertutil.dll and copy it. Then go back to c:\windows\system32 and paste the file in that folder.

Some technicians use a boot disc, either Windows PE or linux disc. Then, they boot from there and copy the appropriate files. You can also remove your hard disk and connect it to another computer and do the file transfer if you want to do something "adventurous".

If you are still experiencing a problem after the steps above, try to reinstall a good known copy of Internet Explorer 8.

Does this post helped you in any way? Please consider sharing it to your friends by clicking the buttons below.

Comments

Anonymous said…
system information is unable to open this .nfo file. The file might be corrupt or incompatibel with this version of system information.
how to solve this problems?
Edmar said…
Open the .nfo file using notepad. Right click > Open with... > then choose notepad. If you double-click the file it will open using System Information and that error would occur.
Anonymous said…
thanks your very much..it worked for me.

Popular posts from this blog

How to check if your PSP can have CFW installed

Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged (code 19)

Globelines' Globe Broadband and Torrent Settings