"An unexpected error occurred" - Airport Extreme Base Station Error Fix

TLDR fix: Use a LAN cable to connect to your Airport Express Base Station rather than connecting through WiFi.

Long and winded details:

I bought a secondhand Airport Extreme Base Station a while ago and I just decided to set it up tonight. I ran into this error when I ran the AirPort Utility on my Macbook Air: "An unexpected error occurred".

No clue, no nothing. It just refused to finish the setup.

Here's my current setup:
1. PLDT Home Fibr with its own WiFi Router/Modem (FiberHome GPON ONU Model: AN5506-04)
2. Airport Extreme Base Station Model 1408 (5th gen I believe)
3. One of the Airport Extreme LAN port is connected to one of the LAN ports of the PLDT modem
4. Macbook Air running macOS Mojave 10.14.4

Things I did / suspected to be causing the issue:
1. Aftermarket power brick of the Base Station. I'm using a 12V 1.5A output instead of 1.8A required by the Base Station. But it's working fine until now so I guess that's okay.
2. I thought it is straight up defective and I got scammed (thankfully not)
3. PLDT modem restriction: The PLDT router is known to have disabled ports at the back but I unlocked it long time ago so wasn't the issue.
4. I tried resetting the Airport Extreme but still didn't work (push the reset button for at least 5 seconds until the front light blinks)
5. In the end, I was able to fix it by using a LAN cable connected from my computer to the Airport Extreme.

If you're using a Macbook Air you will need a LAN to Lighting connector.




--------------------------------------------------------
Does this post helped you in any way? Please consider sharing it to your friends by clicking the buttons below.

Comments

Popular posts from this blog

Funny UST Scandal Avi.Exe Remover

Computer Shuts Down when you Open up CMD (Command Prompt)

Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged (code 19)