How To: Port Forward Globe Broadband's Prolink H9200
Here's a step by step guide on how to Port Forward Globe's Prolink H9200 to be use in Utorrent.
Port forwarding in Prolink H9200 is a little bit different in Hurricane 9300G, but it is as easy. Torrent downloads are greatly affected if you do not use port forwarding in Globe DSL.
Step 1. You need to set Port 80 in Utorrent for incoming connections. Any other port is blocked by Globe Broadband. Open up Utorrent, at the upper left menu, click on Options > Preferences.
A box will appear like the one below, put 80 on the box next to Port Used for Incoming Connections. And also, remove the check next to Enable UPnP port mapping
To enable Port Forwarding in Prolink Hurricane's H9200, you need to have Static IP address on your PC.
Go to your desktop, Right Click on My Network Places and then click on Properties. Something like the box below will appear, select Local Area Connection, right-click on it and then choose properties.
Double click on Internet Protocol (TCP/IP)
Internet Protocol Property box will appear. Enter information like the box below:
Ip address: 192.168.1.3 (default assigned ip address when using dynamic ip)
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.1
Preferred DNS server: 192.168.1.1
Now that you already configured Utorrent and your static IP address. It is now time to configure your modem. I will borrow pictures from fortforward.com
Open up your favorite browser like Mozilla firefox, Internet Explorer or Opera browser. Type in the address bar 192.168.1.1 (that is the default IP address of your modem)
A box will appear prompting you for your username and password. The default username is admin and the default password is password. This page will appear (click the picture to enlarge):
Click the Services button near the top of the page (click the picture to enlarge):
Select NAT Rule Entry from the NAT Options drop down box.
Click the Add button near the bottom of the page and enter these information, and then click submit.
Click the Close button near the bottom of the page. 
Select Low from the Security Level drop down box. Select Accept from the Public Default Action, Private Default Action and DMZ Default Action drop down box.
*Some pictures are from portforward.com
Port forwarding in Prolink H9200 is a little bit different in Hurricane 9300G, but it is as easy. Torrent downloads are greatly affected if you do not use port forwarding in Globe DSL.
Step 1. You need to set Port 80 in Utorrent for incoming connections. Any other port is blocked by Globe Broadband. Open up Utorrent, at the upper left menu, click on Options > Preferences.
A box will appear like the one below, put 80 on the box next to Port Used for Incoming Connections. And also, remove the check next to Enable UPnP port mapping
To enable Port Forwarding in Prolink Hurricane's H9200, you need to have Static IP address on your PC.
Go to your desktop, Right Click on My Network Places and then click on Properties. Something like the box below will appear, select Local Area Connection, right-click on it and then choose properties.
Double click on Internet Protocol (TCP/IP)
Internet Protocol Property box will appear. Enter information like the box below:Ip address: 192.168.1.3 (default assigned ip address when using dynamic ip)
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.1
Preferred DNS server: 192.168.1.1
Now that you already configured Utorrent and your static IP address. It is now time to configure your modem. I will borrow pictures from fortforward.com
Open up your favorite browser like Mozilla firefox, Internet Explorer or Opera browser. Type in the address bar 192.168.1.1 (that is the default IP address of your modem)
A box will appear prompting you for your username and password. The default username is admin and the default password is password. This page will appear (click the picture to enlarge):
Click the Services button near the top of the page (click the picture to enlarge):
Select NAT Rule Entry from the NAT Options drop down box.
Click the Add button near the bottom of the page and enter these information, and then click submit.
Click the Close button near the bottom of the page. Click the IP Filter link near the top of the page.
Select Low from the Security Level drop down box. Select Accept from the Public Default Action, Private Default Action and DMZ Default Action drop down box. Click the Submit button near the bottom of the page.
Click the Admin button near the top of the page.
You should now see a new menu. In this new menu, click Commit & Reboot.
Click the Reboot button near the bottom of the page.
And you're done.
*Some pictures are from portforward.com
Comments
thanks a lot!!!
Now I'm trying to figure out to enable file sharing between my two laptops (one connected to the Prolink H9200 LAN port and the other through the USB port using the provided USB connection wire). I don't know but it seems the static IP address (mentioned on your blog) i used caused the miscommunication of my two laptops, I previously tried ad hoc network before but i also was not able to share files only internet connection was shared. If you have any idea on what i should do... i would really appreciate it.
1. Make your IP Static - Ex. 192.168.1.150
2. Go to your Modem (Prolink 5200) Gui. Select Firewall then hit DMZ, click enable, enter your IP add (192.168.1.150)
3. On Firewall again hit Port Forwarding
Protocol: Both
Local Ip: 192.168.1.150
Local Port: 46504 - 46504
Remote Ip add: 0.0.0.0
Public Port: 46504 - 46504
Interface: any
4. Click ADMIN, Hit SAVE & Reboot
5. Open UTORRENT, Press ctrl+G Change Port to 46504.
by: Cryptonyt
I have also a broadband connection from Globelines und the Prolink H5200 Modem/Router.
the instuctions here works very well. thanks a lot.
who know, where i get more informations about settings for my modem/router ProLink H5200?
I like to use webhosting and ecommerce, so I need to set some options, but I dont know how.
Ilook for a manual or other information.
thanks for your help
Miko
I use the Globeline Prolink Modem/Router H5200
know somebody this problem?
Diagnostic Test
LAN Connection Check
Test Ethernet LAN Connection PASS
ADSL Connection Check
Test ADSL
Synchronization PASS
Test ATM OAM F5 Segment Loopback PASS
Test ATM OAM F5 End-to-end Loopback PASS
Test ATM OAM F4 Segment Loopback PASS
Test ATM OAM F4 End-to-end Loopback FAIL
Internet Connection Check
Test PPP Server Connection PASS
Test Authentication with ISP PASS
Test the assigned IP Address PASS
Ping Primary Domain Name Server PASS
so: i can see 1 error there.
thanks in advance
you cant make Rule ID to 1. there is already and existing Rule ID 1. .is it ok if i set it to 2 instead? help pls. .thanks in advance
http://www.hxlimited.com
free file hosting
paano ba mag portforward gamit ito? meron kc game na KCVDS kelngan mag portforward para mka laro ng online using IP address..wala kc option ng portforward ang modem ko..
pls help!
Port Forwarding Utorrent on the Prolink 5201
that would be awesome! =D
2020. still no solution, so I have to use VPN instead huh? That sucks D: