Cyberlink PowerDVD & Media Player DVD Error Codes - Error Code: 80040216

Cyberlink PowerDVD & Media Player DVD Error Codes - Error Code: 80040216

Fixes I found while trying to fix…
1. Reinstall program.
2. Make sure speakers are plugged in correctly.
3. Change cable to 80 pin IDE cable, make sure master/slave is setup correctly (i never use CS btw).
4. If it’s an 80 pin cable, replace it anyways.
5. Check the system event log for other errors & research them.
–This lead me to find a error while paging operation was taking place on /CDROM0
6. Disconnect slave/master & swap visa versa, etc. Switch sata ports if you have a sata dvd drive.
7. Replace the drive (fixed it in my instance)

Comments

David J Askew said…
Hi

Thank you for the feedback the computer is IDE, not Sarta.

Popular posts from this blog

How to check if your PSP can have CFW installed

Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged (code 19)

Funny UST Scandal Avi.Exe Remover